Linksys Velop red light issue has become one of the most annoying issues for users. If the same issue has become a pain in the head for you as well, know that we have got you covered. In this article, we have provided the most effective hacks that will help you troubleshoot the “Linksys Velop red light”. So, are you waiting for “Good Friday”? No? Then, without much delay, let’s dig a little deeper!
Fixed: Linksys Velop Red Light Issue
Fix 1: Restart Your Linksys Velop Router
In 90 percent of cases, technical glitches can stop your Linksys Velop router to perform well and lead you to experience many big issues apart from the one you are currently experiencing. So, to get rid of technical glitches, we suggest you to power cycle your Linksys Velop router. Here are the guidelines needed to reboot your Linksys Velop router:
-
Disconnect your Linksys Velop router and modem.
-
Power off the Velop device and unplug it from the wall socket.
-
Wait for a couple of seconds.
-
Plug your Linksys Velop back into the wall socket and press the power on/ off button.
-
Reconnect your Linksys Velop router and modem.
Now, check whether you are still experiencing the “Linksys Velop red light” issue. If yes, then we highly suggest you take the help of the next troubleshooting tip provided below.
Fix 2: Get in Touch with Your ISP
Yes, that’s 100% correct! A weak or poor internet connection can also force you to experience the “Linksys Velop red light” issue. No worries! In order to get rid of the issue, we suggest you contact your internet service provider. On the off chance if you find that the internet-related issue persists from his end, give him some time and request him to fix the internet connectivity issue for you.
Fix 3: Verify the Velop-Modem Connection
Is everything fine from the end of your internet service provider? Even after improving the speed of your internet connection, the “Linksys Velop red light” issue doesn’t leave your back? Need not to worry! It means that the connection between your Linksys Velop router and modem is not properly made. To troubleshoot the issue, we suggest you to ensure a proper Ethernet connection between your Velop and modem. Also, make sure that the cable used by you for connecting your devices is well working.
What happened? Don’t have the Ethernet cable handy? Why worry then? Consider making a Velop-modem connection in a wireless manner.
Fix 4: Perform Linksys Velop Firmware Update
Performing Linksys Velop router firmware update is one of the ultimate ways to get rid of the “Linksys Velop red light” issue. So, if you haven’t updated the Linksys Velop’s firmware, do the needful right now by navigating to its firmware update page using the Linksys router login details, and following the on-screen instructions as per the Velop’s model you have.
Fix 5: Reset Your Linksys Velop Router
Still struggling with the “Linksys Velop red light” issue? Oh, snap! Unfortunately, you are left with no other option than to reset your Linksys Velop router. Wondering how to reset Velop? Wonder no more! The reset process is not rocket science. All you have to do is to press the reset hole on your Linksys Velop router and wait for some seconds.
Note: If you get any sort of issues while resetting your Linksys Velop router, then ensure two things:
• First, your Velop is on a continuous power
• Two, the Linksys Velop is disconnected from the modem
In accordance with the important two points we have just enlisted above, you will surely have no issues while resetting your Linksys Velop router, do you?
After resetting your Linksys Velop router, perform its configuration process from the scratch.
Endnote
Your Linksys Velop router LEDs indicates different meaning. In the event that the LED on your Velop device is blinking red, then trust us and mark our words, the troubleshooting hacks mentioned above will surely help you get rid of the issue in a flash.
Now, can we hope that you have applied these tips in order to get rid of the “Linksys Velop red light” issue, don’t you? If yes, then we really hope that they were helpful, weren’t they? Please let us know, which fix helped you troubleshoot the issue. One, two, or all of them?