Netgear routers provide seamless WiFi signals. Right after the initial Netgear router setup using the Netgear routerlogin page, you can begin enjoying the WiFi network on various devices in the home. If you are using a brand new router and have not set it up then use the user manual to see how you can set it up in the home. In case your Netgear router is not sending WiFi signals, then make sure that you have correctly configured the router. However, if it was working fine till now and suddenly it stopped giving network, then use the instructions provided in this article to help you fix the problem.
Netgear Router is Not Sending WiFi Signals [Resolved]
Though you can access the Netgear router internet by putting to use an Ethernet cable, it is not feasible to access the network in all the devices this way. Having a WiFi network is important. If your Netgear router has stopped giving WiFi then follow the steps provided ahead:
Power Cycle the Router
You can try fixing the issue by power cycling the Netgear router. There have been instances where simple minor technical glitches with the router make it act in a weird manner. You can fix them by power cycling the device. So power off the Netgear router right away and after waiting for some time, power it on again. Wait till the lights are stable. Now when the router is completely powered up, try accessing its network to see if the issue has been fixed or not.
Check Ethernet Cable
In the event, you have connected the Netgear router to the modem using an Ethernet cable, then check the cable now. The chances are that the cable is damaged or is not connected properly to the devices. Replace the cable if you find it faulty and make sure that it is making a solid connection between the Netgear router and the modem.
Reduce Distance Between Networking Devices
On the other hand, if you have connected the Netgear router to the modem using a wireless connection then make sure that the router is placed within the modem’s range. If you find the distance between the devices is more than necessary, then bring the devices closer to each other now. Only when the router is receiving proper signal from the modem, you will be able to get WiFi signals from the router. So do the needful. But do not place them too close to each other to avoid further issues.
Check the WiFi Radios
By default, the WiFi radios on the Netgear router are on. That means the router allows the WiFi signal to be transmitted. If it gets off by any chance, then you won’t be able to access the router’s WiFi. Thus, login to Nighthawk router to access its admin panel and see if the router WiFi radios are enabled or not. If you find them disabled, then enable them right away.
Relocate the Netgear Router
You must place the Netgear router at a central place in the home. In case the router is placed in an enclosed area, then the devices will find it difficult to access its WiFi. Avoid placing it in such an area from where the WiFi network can not easily be transmitted. Place it on a higher shelf and at an open place in the home
Update Router Firmware
If the above steps failed to fix the issue under discussion, then update the firmware on your Netgear router now. You may also face connectivity issues with the router if the firmware has not been updated lately. If you want to update the firmware manually, then download the latest firmware file and save it on the PC. After that access the admin panel using the login web address or Nighthawk app for PC and upload the firmware on your router.
The Conclusion
We hope that you are no longer facing the Netgear router not sending WiFi signals issue. We hope that the troubleshooting hacks have proved to be useful to you. We recommend you keep the Netgear router firmware updated all the time to get the best output and avoid certain issues with it. Simply access the Netgear login page using the web address or Nighthawk app to see if any firmware updates are ready. Whenever there is any, directly update it on the router.